Dimensions of Better Bath RV Kitchen Sink

Question

Question:

Is the dimension given the overall dimension including the lip. 27X16

asked by: Danny B

0

Expert Reply:

I measured the Better Bath RV Kitchen Sink # LC385313 and found that the 27" x 16" did include the lip, as you can see in the accompanying photo.

I also measured the lip and found that it was 1"; the sink also has a 3-1/2" drain opening.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Unfortunately, a master listing of the individual components that are used to manufacture a given RV just doesn't exist. We wish it did, as it would make things much more simple. I've provided a photo showing the dimensions of the sink. If…

view full answer...

Answer 2

Yes, the 27" long, 16" wide, and 6-7/8" deep dimensions for the: -Better Bath RV Kitchen Sink #LC385313, does include the lip. The interior dimensions measure 25" long, 13-7/8" wide, and is 6-3/4" deep. Attached is a…

view full answer...

Answer 3

We have the Better Bath RV Sink part #LC385313 which is 27 inch by 16 inch like you said you want and has a single bowl. This is an undermount and we do not carry any that mount over the counter.

view full answer...

Answer 4

The Better Bath Double Bowl RV Kitchen Sink Item #LC388412 depth measurement, front to back of the bowls, is 13-3/4 and has width of 24-3/4. If your opening is 25-3/4 x 14-3/4 then you will potentially have an inch of the top edge of the sink flange…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Dimensions of Better Bath RV Kitchen Sink

Product Page this Question was Asked From

Continue Researching