Recommended Replacement Hitch Lock Body for Yakima Hitch Mounted Bike Rack

Question

Question:

will this work on the yakima road trip 4 bike rack ?

asked by: Bob

0

Expert Reply:

The Replacement Body for Yakima HitchLock 2007 and Newer # 8820048 will work on the Yakima RoadTrip 4 Bike Rack - 2" Hitches - Black as a replacement for the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235. The # 8820048 does not come with the lock core, so that is a separate cost but can match your current key if you already have one.

expert reply by: Jason S

0

Answer 1

According to our friends at Yakima, the Control Key for the Yakima Same Key System, #Y07204 will only work on lock cores that are already unlocked. If you know the key number, you can order a replacement using the page I have provided a link to. If…

view full answer...

Answer 2

I checked with Yakima and the lock housing you purchased is still being made so you should just need a 2-pack of lock cores, #Y07202. It comes with 2 locks, 2 keys, and the change key to install the locks.

view full answer...

Answer 3

The Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) #Y07235 is the lock you are seeking. It is designed to work with the Replacement Hitch Bolt, Nut and Clip for Yakima Bike Racks and DryDock Load Assist - 2" Hitches…

view full answer...

Answer 4

The part #8820048 is a replacement body for a Yakima HitchLock. The lock core and keys are intentionally not included as odd as that sounds. This would be for someone who has a good lock core and key and just needed to replace the body. If you a lock…

view full answer...

Answer 5

You'll need the Yakima #Y07235 hitch pin. From what I can tell, it looks like that's the only thing that's missing from your rack.

view full answer...

Answer 6

If just the lock is no longer working for the Yakima HitchLock you can replace just the body with the Replacement Body for Yakima HitchLock #8820048. This will let you use your keys, but if there is a potential issue with the lock core you may want…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

Recommended Replacement Hitch Lock Body for Yakima Hitch Mounted Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching