Availability of Sliding Ladder Rack for 2018 Toyota Tacoma with Deck Rail System

Question

Question:

hi. I have a 2018 Toyota Tacoma with the deck rail system. I have seen the sliding ladder racks and am wondering if there is one that will fit my truck. If not do you have another recommendation> Thank you.

asked by: Royce

0

Expert Reply:

I do have an excellent option for you however the TracRac Sliding Ladder Racks do not fit the 2018 Toyota Tacoma.

I recommend taking a look at the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This is confirmed to fit your truck and while it doesn't have quite the adjustability of the TracRac SR units it does use a simple clamp-on installation with locking knobs that allow for easy removal. This means you will be able to easily loosen the rear uprights so you can move them forward or back on the bed rails to provide different crossbar spreads on the ladder rack. This particular system is designed specifically for the Deck Rail System on your Tacoma.

I have attached a short video demonstration that you can also check out.

expert reply by: Chris R

0

click to enlarge

Answer 1

The right ladder rack will depend on what you're wanting to use it for. If you're mounting this on something that's strictly a work truck, you won't need any height adjustment so something like the Thule TracRac…

view full answer...

Answer 2

I do have an option for you but the Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum part #59799 does not have a compatible hardware kit to allow you to mount a tool box. I recommend to use the Thule TracRac TracONE Ladder Rack for Toyota…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 5

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 6

I'm pretty sure you are correct that the Coil SumoSprings Custom Helper Springs #CSS-1145R will fit your 2018 Toyota Highlander, however, we haven't had the chance to test this out and SuperSprings doesn't have this listed in their…

view full answer...

Answer 7

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 8

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 9

Hey Angela, If you're wanting a ladder rack then I recommend the Thule TracRac TracONE Ladder Rack #TH27000XTB-TA. This rack comes with load stops that you could use to secure your paddleboards or you could go with a track mounted carrier like…

view full answer...

Answer 10

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Availability of Sliding Ladder Rack for 2018 Toyota Tacoma with Deck Rail System

Featured Help Information

Miscellaneous Media

Continue Researching