How to Resonated Exhaust Tips Affect Sound of Exhaust

Question

Question:

Hi , I have a 99 mustang gt, flowmaster catbacm exhaust very aggressive and loud . The tips need changing and the only ones I liked is a resonated model . Will a resonated tip reduce the aggressiveness / roar at all? If so about how much?

asked by: Kevin

0

Expert Reply:

Resonator exhaust tips will slightly mellow the tone of the exhaust but you'd most likely not notice much of a difference. Since the resonators are straight through they can't really quiet anything down.

expert reply by: Jameson C

0

Answer 1

Using a resonated exhaust tip such as part #PM-5104 would make the exhaust sound more crackly, for lack of a better term, than the stock exhaust and it might be slightly louder. A resonator exhaust tip causes the air to vibrate a certain way in a…

view full answer...

Answer 2

As long as the exhaust pipe of your vehicle is between 1-3/4 to 2-1/2 inches in diameter the part #PM-5104 would fit. If anything it will make the tone of your exhaust slightly mellower or quieter. We had a guy with exhaust drone problems on his…

view full answer...

Answer 3

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 4

Since the bolt holes line up vertically and horizontally you'll be able to bolt the Trailair Air Ride 5th Wheel King Pin - Leland 7920 #UF35-946208. This specific pin box actually has an 18" king pin to first set of bolt holes measurement…

view full answer...

Answer 5

I took a look at the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 that you mentioned and it's actually going to be a fit for the Lippert 1621 and 1621 HD 5th-wheel pin boxes, and not your Leand 7920, however I do have another…

view full answer...

Answer 6

The mounting holes of the Swing Out Extension Brackets part #LC182496 that you referenced are for the side that attaches to the jack itself and not the portion that attaches to the camper. You'd need to attach these to the L-bracket on the camper…

view full answer...

Answer 7

Yes the Happijac swing out bracket kit part #LC182496 does work with your camper with a set of Happjac truck camper jacks and would also work/be needed for your 2021 Ram truck that is a dually.

view full answer...

Answer 8

You are correct that the difference between using the standard mounting option on the HappiJac Electric Truck Camper Jack System #LC736515-ELKIT and adding the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496 is that the…

view full answer...

Answer 9

For the TorkLift Custom Frame-Mounted Camper Front Tie-Downs #TLC2220 the 1/2-inch bolt that is to be installed in the hole in the bottom of the front spring perch should be placed using the included coiled bolt fisher wire. Insert the coiled end…

view full answer...

Answer 10

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a point…

view full answer...

Answer 11

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500 whether…

view full answer...

How to Resonated Exhaust Tips Affect Sound of Exhaust

Product Page this Question was Asked From

Continue Researching