12 Volt Jensen JTV24DC TV Compatibility with AC Power Adapter

Question

Question:

Do you have a power adaptor for this Jensen model? Thanks

asked by: Garrett F

1

Helpful Expert Reply:

The Jensen TV JTV24DC is compatible with the AC/DC Power Adapter for Jensen Television # ACDC1911. I reached out to my tech contact at Jensen to confirm this.

expert reply by: Jason S

1

Answer 1

I wasn't able to find your exact part number TV but I believe you may have the JE3212LED which if so you'd then need the AC/DC adapter part #ACDC3212 and you'd be set!

view full answer...

Answer 2

If you have an AC outlet in your bedroom you can use the AC/DC Power Adapter for Jensen Television #ACDC3212 or if you have a DC outlet like the Multi Device RV Charging Station #37215095 you'll want to use the Power Adapter Cord for Jensen LED…

view full answer...

Answer 3

I verified that the resolution was 1920 x 1080 for the Jensen LED RV Smart TV - 1080P - 2 HDMI - 110 Volts - 32" Screen #ASA38VR.

view full answer...

Answer 4

I have a solution for you. I confirmed with Jensen that the AC/DC Power Adapter for Jensen Television #ACDC3212 will not work with your Jensen LED RV TV - 1080P - 24" JEN46VR. The correct adapter you need is the AC/DC Power Adapter for Jensen…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

12 Volt Jensen JTV24DC TV Compatibility with AC Power Adapter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching