Measurements of Custom Trailer Hitch # C13097

Question:

Can I get a mesaurement from the top of the frame mount to the top of the cross tube? As well as to the bottom of the cross tube. Also, the thickness of the cross tube top to bottom. I have a custom bumper and was hoping it would just fit through its opening, I would prefer not to cut into the bumper.

asked by: Holland E

Expert Reply:

Some of the measurements of the Curt hitch, part # C13097, were a little tricky because the mounting holes towards the rear of the vehicle are not level with the holes towards the front. The easiest, the size of the receiver tube top to bottom, is 3 inches.

From the top of the mounting holes closest to the rear of the vehicle to the bottom of the receiver are 7-1/4 inches. Those same holes to the top of the receiver tube is about 4 inches.

The holes closest to the front of the vehicle to bottom of the receiver are 6-5/8 inches on the driver's side and 10 inches on the passenger's side. To the top of the receiver then they're about 3-3/8 inches on the driver's side and 6-3/4 inches on the passenger's side.

The hitch is designed to fit the Dodge Durango from 1998 to 2003.

expert reply by: Charles S