Weight Distribution System and Towing Ability of 2006 Silverado 1500 4x4
Question:
I have a 2006 silverado 4x4 1500 rear axle ratio 410. I have been pulling around my travell trailer for 10 yrs it is 6100lbs hitch is 600lbs tongue weight. All good. Now I may be buying a 2012 Springdale travel trailer with 7600lbs tongue weight 750lbs. My present hitch says 10000 lbs trailer weight tongue 1000lbs with weight distribition without 6000llbs and 600lbs for tongue, Will this truck be ok to pull the new trailer
asked by: Larry J
Expert Reply:
Unfortunately I don't have enough info on your 2006 Chevy 1500 4x4 to give you the definite answer. I would need to know if you have the standard wheel base and what motor you have.
The good news is you can easily determine your specific towing capacity. You simply need to looki at the tag inside your driver's door jamb. Then you will need take your Gross Combined Weight Rating (GCWR) and subtract that by the the Gross Vehicle Weight (GVW) of your truck from the (GCWR) that will give you the maximum Gross Trailer Weight (GTW).
Regarding the hitch, you will need to use a weight distribution system if your truck has the towing capacity needed for that trailer. If you don't have a weight distribution system, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET which is an excellent fit for that trailer. You will then simply need the socket # ALL643216 to install the hitch ball in the system. I've attached a video to assist with the other functions.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure a Trailer Axle
- Q&A: Installation Instructions for the Draw-Tite Hitch 75251 on a 2011 Dodge Dakota
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Light Replacement Lens for Light Marked SAE-A-P2-DOT-02
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch Receiver for a 2005 Dodge Dakota
- Q&A: Trailer Hitch Receiver and Wiring For a 2008 Dodge Dakota
- Q&A: What is the Difference Between Max Carrying Capacity and Weight Distribution Capacity
- Q&A: What Is Needed To Tow A 28 Foot Trailer With A 2005 Dodge Dakota V8 Club Cab
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Types of Bumpers