Gooseneck Latch Pin Pulls Out when B&W Companion Slider is Installed
Question:
I have a BandW slider fifth wheel hitch. When I tighten the draw down bolt, I can still pull the latch pin to the unlock position. I have tightened less and more, before engaging the latch pin, but same result. Thanks
asked by: Keith W
Expert Reply:
When installing the B&W Companion slider # BWRVK3400 you will pull out the gooseneck pin all the way and rotate clockwise, remove the ball, and reinsert the gooseneck pin. At this point make sure that the pin is in properly. B&W states "Check the latch pin under the truck. Make sure that the latch pin has passed through both sides of the socket and that the pin is covered up inside the socket by the socket adjuster, see Figure A1 in your instructions. If the pin is visible inside the GN hitch socket, retract the gooseneck latch handle and use the draw-down bolt to adjust the
socket adjuster."
If you are tightening the draw-down bolt first and the gooseneck pin is not in the proper position then you could pull out the pin like what you are experiencing. You can also check to make sure that the socket adjuster in the hitch shank is down far enough or otherwise in the proper position before reinserting the pin. If it is not you may need to first loosen up the draw-down bolt to get it in the proper location.
Product Page this Question was Asked From
B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Adjustable Height
- Hitch Adapters
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Q&A: Replacement Draw-Down Bolt for B&W Companion 5th Wheel Sliding Base
- Shop: Suspension Enhancement
- Q&A: B&W Companion Draw Down Bolt Not Tightening to Installation Specs
- Q&A: Latch Pin Will Not Engage In Socket Post Of B and W Companion Hitch
- Shop: Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long - All Climate + Wind - Gray
- Shop: Timbren Rear Suspension Enhancement System
- Shop: RV Covers
- Q&A: Do You Need To Torque a Bolt Each Time the B&W Companion Hitch Adapter Is Installed
- Q&A: B&W Companion Sliding 5th Wheel Hitch Wont Slide When Attached to Trailer
- Shop: Rubber Bulb Seal for RV Slide Out - 1-3/16" C-Channel - 30' Long x 1-3/16" Tall
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Rubber Bulb Seal With Fins for RV Slide Out - 1" C-Channel - 60' Long x 1-1/8" Tall
- Shop: Gooseneck Hitch
- Shop: Grille Guard
- Shop: Towing Mirrors
- Q&A: Trailer Brakes for 2006 Forest River Wildcat 5th Wheel Trailer
- Q&A: Can a Single Attachment Point B&W Companion 5th Wheel Hitch be Used with a Sidewinder Pin Box
- Video: Empire Faucets RV Kitchen Faucet with Pull-Down Spout Installation
- Article: Fifth Wheel Hitch Combinations for Ram Trucks with RamBox (2009-Current)
- Shop: Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout - Single Lever Handle - Matte Black
- Video: Review of Steele Rubber RV Slide Out Parts - 15 Foot Rubber Bulb Seal With Fins C-Channel - SR69VR
- Shop: Fifth Wheel Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Search Results: air bags
- Search Results: timbren
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Video: Timbren Rear Suspension Enhancement System Review RU-18-TA-00302588
- Shop: Trailer Hitch
- Search Results: sumo springs