How to Install a 7-Way on a 2011 Honda CR-V for Charging a Trailer Battery
Question:
I am looking to purchase a hitch and a wiring harness from etrailer.com for my 2011 Honda CRV. That installation seems pretty straight forward. But I also need a 7 way adapter. I will be pulling a light pop up without trailer brakes, so I dont need to wire a brake controller. But I would be interested in wiring it so the trailer batter would receive a charge while in transit. So I need to bring 1 wire to the battery, as well as connect the ground. Do you have documentation detailing this?
asked by: Kevin
Expert Reply:
Absolutely! For your 2011 Honda CR-V I first recommend installing the T-One Vehicle Wiring Harness part # 118427 which is completely plug and play. You can see this process in the attached install video. Then in order to convert this 4-way into a 7-way I recommend using the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185 because it has a mounting bracket and both 4 and 7-way trailer connection points.
The only two wires you will want to attach on the 4 to 7-way adapter is the ground (white) and 12 volt power (black). In order to run the 12 volt power wire to the battery you will need part # 10-1-1 (per foot) and part # PK54540. Also, if the trailer hitch on your CR-V doesn't have a welded tab like on part # 75547 you will also need the No-Drill Bracket part # C57202 in addition to the mounting bracket included with the 7-way.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
Pollak Circuit Breaker - Cycling/Automatic Reset - 40 Amp - Straight Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 40 Amp
- Pollak
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Leaf Springs for a Vintage Camper
- Q&A: Start Capacitor Solution for Dometic 15k BTU AC Unit
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox
- Q&A: Availability of Side Crank Trailer Jack with Removable Handle
- Q&A: Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL
- Q&A: Can Bearing Buddy Bearing Protectors be Used on etrailer.com Hub Assembly # AKIHUB-440-2-1K
- Q&A: Replacement Idler Hub Assemblies And Wheels For Boat Trailer
- Q&A: Trailer Wiring Harness that Fits 2023 Hyundai Palisade
- Article: Determining Trailer Tongue Weight
- Article: What Exactly is Tongue Weight?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?