Trailer Valet to Move a Boat Trailer Around in a Garage
Question:
I have a 20’ wake board boat and am trying to squeeze it into my garage. I have to get it in at an angle make it fit in my garage. My plans is to back it in and use the trailer valet to push the tongue towards the corner. Would this work good for that?
asked by: Andrew
Expert Reply:
Using a Trailer Valet product such as # STC-V211, # TVXL25, or # TVXL2 are all great options for what you want to do. The crank handles make light work of manually moving a trailer around and the dual tires provide traction. I have linked some videos for you to check out. A dolly such as # RA20 is not a good option because it is rated for 600 pounds total weight. Unless the trailer weighs under 600 pounds you would be overloading this type of dolly.
Another option, depending on the construction and design of the trailer, is to use a folding tongue. We have several hinge kits which I have linked for you that you could potentially use. Please note that these hinge kits are not recommended for aluminum frames.
If you can use one of the hinge kits then you could back the trailer into the garage straight and then fold the tongue allowing you to keep the trailer straight rather than at an angle.
Products Referenced in This Question
Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Trailer Dolly
- Manual Dolly
- 5000 lbs Capacity
- 15 Inch Tall
- Steel
- Silver
- Trailer Valet
more information >
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2 Inch Ball
- Black
- Trailer Valet
more information >
Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2-5/16 Inch Ball
- Black
- Trailer Valet
more information >
Product Page this Question was Asked From
- Trailer Dolly
- Manual Dolly
- 500 lbs Capacity
- 16 Inch Tall
- 17 Inch Tall
- 18 Inch Tall
- 19 Inch Tall
- 1-7/8 Inch Ball
- Black
- RackEm
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wiring Diagram for a 1997 Peterbilt Semi Tractor with 7-Pin Round Connector
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Dolly for 16 Foot Long Enclosed Trailer
- Q&A: Will Curt Weight Distribution Shank Work with Fastway E2 Weight Distribution System FA92-02-4100
- Q&A: Can Rack'em Trailer Dolly # RA20 be Used with Trailer that has 2 inch Ball Coupler
- Q&A: Can Rack'em Trailer Dolly be used with Coupler that Has 2-5/16 inch Hitch Ball Size
- Q&A: Tires For Load Rite PWC Trailer With Higher Speed Rating
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: Blue Ox Tow Bar Features