Using Surco Universal Exterior RV Ladder on Trailer Curved Roof

Question

Question:

I have a 21 ft. Salem by Forest River. The top of the roof is curved for water run off. Will I need to cut some tubeing at the end of the hook on top to adjust for the curvature of the roof?

asked by: Rick R

0

Expert Reply:

The Surco Universal Exterior RV Ladder # SP502L referenced in your question features brackets that secure the top of the ladder to your roof. These brackets can swivel up and down to allow it to mount securely to different roof contours so you actually shouldn't need to cut any of the hooko tubing for it to install correctly.

This universal aluminum ladder has an overall length of 84-1/2 inches and a weight capacity of 250 pounds.

expert reply by: Chris R

0

click to enlarge

Answer 1

The ladders we carry including #SP502L are considered universal fit items so you would go with one that best fits your needs. Some can be trimmed shorter than the stated height. To install a ladder the pegs that attach to the trailer and hold the…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 3

We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change…

view full answer...

Answer 4

Thank you for the drawing. It was helpful to see the dimensions you are looking at. We only have one ladder that is a universal fit application, so it will fit your RV but it will not fit in a custom way. It will absolutely be able to give you a…

view full answer...

Answer 5

If your original ladder was 84-1/4 inches long, the Surco Universal Exterior RV Ladder #SP502L would work well for you. I don't have access to any reference material that would tell me which ladder would have originally been used on your…

view full answer...

Answer 6

Yes. You can replace the Progressive Dynamics PD4590K18NS2 with the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV without any issues. Both are 90 amp converters from the same Series…

view full answer...

Answer 7

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

view full answer...

Answer 8

I looked up the Lippert 702095 leaf spring and it's a 25-1/4 inch long spring that has a 2,600 lb capacity per spring. The closest option we have is the etrailer Dacromet coated part #e28SR which is also 25-1/4 inches long but has a 2,500 lb…

view full answer...

Answer 9

We offer three choices in an exterior roof ladder for your Jayco trailer. These can be seen by clicking on the link provided. We offer both straight and contoured ladders to fit both types of trailer exterior and three choices in ladder height,…

view full answer...

Using Surco Universal Exterior RV Ladder on Trailer Curved Roof

Product Page this Question was Asked From

Continue Researching