Trailer Hitch for a 1993 Ford F-250 with Luverne 10 Inch Deep Drop Bumper

Question:

Looking for at least a class 3 trailer mount for a 1993 Ford F250. 37 1/4frame outside to outside. Has a Luverne 10inch down bumper rated for 1000 tongue weight and 10,000 towing weight. The dimension from the rear end of frame to outside of bumper is about 11. Would need at least 8 3/4inch from bottom of truck frame to top of receiver tube. There is only about 1ft of straight frame before it curves.

asked by: Michael L

Expert Reply:

We do have some trailer hitch options for a 1993 Ford F-250 with a 10 inch deep drop bumper. Your best option is Curt hitch # C15511 which measures 8 inches from where it mounts to the frame to the top of the receiver opening. Nothing else drops lower than that. This is a Class V hitch.

If you just can't get an 8 inch drop to fit then the other option is a weld-on hitch such as # 41990-16. This is a Class V hitch designed for trucks with a service body but it could be used for basically anything.

expert reply by: Michael H