How Small is the Opening of the Jaws When the Wheel Lock # 288-02020 is Closed

Question

Question:

I have a small fishing boat trailer for a 14 ft. boat. Will this lock tighten up to 4 at the end of the clamo?

asked by: Cheryl G

0

Expert Reply:

When the Stallion Trailer Wheel Lock # 288-02020 is completely closed the opening only measures about 1-3/4" so it will work perfect for your application.

expert reply by: Jon G

0

Answer 1

Yes the etrailer Trailer Wheel Lock #288-02020 that you referenced would fit a trailer tire size of 175/80-13.

view full answer...

Answer 2

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

view full answer...

Answer 3

You certainly can install two pairs of the Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR on your trailer. In that case we recommend adding one jack to each corner of the trailer frame. Keep in mind that these are designed to stabilize, not lift…

view full answer...

Answer 4

For gooseneck trailers like yours where the coupler is not a standard that we have a lock for the best option is going to be a wheel lock like the etrailer part #288-02020, Barb. This will for sure fit as a lock and would be just as effective so it…

view full answer...

Answer 5

The Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR is the XO corner steadies that you're referring to and in the past we were told that there was no weight capacity and that these were simply to be used to help stabilize the trailer. Looking…

view full answer...

Answer 6

Hey Susan, so we don't have any locks designed to lock a gooseneck coupler's inner tube to the outer tube that is welded to the trailer chassis so the best option we have would be a wheel lock like the part #288-02020 which will prevent the…

view full answer...

Answer 7

I do see the Curt Trailer Hitch Receiver #C15845 has been confirmed by Curt to fit your 2024 Ford F-550 Cab and Chassis with a 34" wide frame. For the wiring we do have the Curt T-Connector Vehicle Wiring Harness #C69CR which Curt has also…

view full answer...

Answer 8

I reached out to Reese and they do not offer that pin separately for your Reese M5 5th Wheel Trailer Hitch #RP26FR. You would have to get a new Head #RP30892 to get their exact pin setup otherwise you can use the 1/4" Safety Pin with 8"…

view full answer...

Answer 9

You are in luck, the Fastway Universal Coupler locks are sold with multiple part numbers that correspond to their key numbers. If you order 4 of the part #FA86-0015-316, they will all have key 316. Check out to the attached video to learn more.

view full answer...

Answer 10

I recommend checking out The Wheel Club - Tire and Wheel Lock #WI490 which fits around your tires and locks into place that way. It will work so long as your wheels are between 13" and 16" and tires that are up to 28" in diameter and…

view full answer...

Answer 11

I have a better solution that wouldn't require you to track down a store that carries the Diversi-Tech Universal Trailer Coupler Lock is now sold as the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 316…

view full answer...

How Small is the Opening of the Jaws When the Wheel Lock # 288-02020 is Closed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching