Will the Curt Kit # C16411-204 Fit a 2011 GMC Sierra 2500/3500 with a Gooseneck Hitch

Question

Question:

Will the rail kit work if you have goose neck already installed in bed

asked by: Jason P

0

Expert Reply:

Although the Curt Custom Fifth Wheel Installation Kit # C16411-204 is a fit for your 2011 GMC Sierra 2500/3500, if you already have a gooseneck trailer hitch installed it will not fit as they use the same bracket locations.

If you let me know what gooseneck hitch you have I can see if we have an adapter that will allow you to utilize a 5th wheel hitch though.

expert reply by: Jon G

0

Jon C.

3/11/2024

I have this same scenario with a Curt 60604 gooseneck hitch setup. Is there an adapter that'll work?

Reply

Jon G.

3/12/2024

@JonC If your Curt 600 Series Gooseneck Installation Kit # C60604 has the Curt Double Lock Center Section # C60607 then you'll be able to use the Curt X5 5th Wheel Base Rails Adapter # C16210 with a 5th wheel hitch that installs using the industry standard rails type. If you have the Quick Goose 2 or Underbed center section instead then I'm not seeing that we have an adapter for that. Let me know what the year/make/model is for your truck as well as the bed length and I can recommend a 5th wheel hitch as well if you don't already have one.

Reply

Answer 1

There is a great option for a Curt 5th wheel hitch you can use with your Lippert Turning Point pin box, but the Curt Q20 Fifth Wheel Hitch #C16130 is not compatible. The reason is the head of the Q20 has what is called a "spherical axial…

view full answer...

Answer 2

The Curt Curt X5 5th Wheel Base Rails Adapter #C16210 cannot be used with a rotating pin box due to the stress on the connection point, which is the gooseneck hitch ball opening, will be too great. This can cause a catastrophic failure, ending in…

view full answer...

Answer 3

Yes; the Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock Gooseneck Trailer Hitches - 20,000 lbs #C16210 is compatible with a Curt Q16 hitch.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 8

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 12

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Will the Curt Kit # C16411-204 Fit a 2011 GMC Sierra 2500/3500 with a Gooseneck Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching