Does Firestone Air Bag Kit # F2400 Fit 2006 Ford F-350

Question

Question:

Are these confirmed to work with the above configuration? I noticed previously answered was their compatibility with a 2006 F250 but just wanted to make sure on the F350. Thanks.

asked by: James E

1

Helpful Expert Reply:

Yes, the Firestone air bag kit part # F2400 that you referenced is a confirmed fit for your 2006 Ford F-350 and would work well. I attached an install video for you to check out too.

expert reply by: Jameson C

1

Answer 1

Yes they sure do; I verified with Firestone that the Ride-Rite air bags for your 2006 Ford F-350 4x4 will fit with your factory stabilizer bar. The correct part number for your truck is the following: - Firestone Ride-Rite Air Helper Springs #F2400…

view full answer...

Answer 2

For your 2007 Ford F-250 with a gooseneck hitch I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle #F2400 if your truck is 4WD, or the #F2398 if your truck is 2WD as they are the only option for your truck with an…

view full answer...

Answer 3

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 4

If your 2005 Ford F-250 DRW is a 4x4 then you will want to use the Firestone Ride-Rite Air Helper Springs part #F2400 but if your 2005 Ford F-250 DRW is a 4x2 then you will want to use the Air Lift LoadLifter 5000 Air Helper Springs part #AL57397.…

view full answer...

Answer 5

Yes, the Firestone Vehicle Suspension, item #F2400, will fit on your 2005 Ford F250 Super Duty crew cab short bed since it is 4 wheel drive. We have online instructions for you to review that show specific mounting locations for these kits. These…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Does Firestone Air Bag Kit # F2400 Fit 2006 Ford F-350

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching