Ball Mount With 1-1/4 Inch Drop That Fits 1-1/4 Inch Trailer Hitch
Question:
I read an answer to a question on your web site regarding the type of draw bar to use with a Draw-tite hitch and Mike L. suggested the following The average trailer coupler height is around 16-17 inches, and the likely height of your receiver tube is about 11 inches, so youll need a ball mount with a rise of around 5 inches like part # C45015. I have a Draw-tite hitch on my 2006 Volvo V70 with a 1.25inch opening for a draw bar. I purchased a 1.25inch Reese draw bar #7067933, but the fit is way too tight. I believe the drop I need for my Scamp trailer is 1.25, measuring from the top of the Reese draw bar where it slips into the receiver to the top of the bar where the ball mounts. Do you have a draw bar with the drop I need and that will fit my Draw-tite tow hitch, The ball size for my trailer is 2. Thanks
asked by: Richard
Expert Reply:
For a ball mount (draw bar) with a 1-1/4" drop that fits into a 1-1/4" trailer hitch you need the Draw-Tite # 36051, which has a 300 lb tongue weight capacity, 3,500 lb towing capacity and is only compatible with Class II 1-1/4" hitches.
This ball mount includes a pin and clip but for a 2" hitch ball you need # 19258.
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Hitch Installation Tips
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Hitch Recommendation for a 2004 Volvo XC70
- Q&A: Trailer Hitch Receiver That Fits 2004 Volvo XC70
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Availability of 2 Inch Receiver for 2004 Volvo XC70
- Q&A: Locating Factory Weldnuts on 2003 Volvo V70 to Install Curt Trailer Hitch # C12318
- Q&A: Trailer Hitch and Bike Rack that Fits 2003 Volvo V70
- Q&A: Can Trailer Hitch Extender hes0 Be Used for Towing with a 2007 Ford Explorer
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: 2 Steps for Hooking Up an External Propane Tank to Your RV
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com