Will 80" x 60" Cargo Net fit 2012 Ford F-250 Short Bed

Question

Question:

Is the 60 inch x 80 inch cargo net what you recommend for a 2012 F250 Crew Cab short box?

asked by: Keith M

1

Helpful Expert Reply:

Absolutely; the ProGrip Cargo Net for Full-Size Truck Beds # 317-901800 is 80" x 60" which makes it a perfect fit for the 6-3/4' bed that you have on your 2012 Ford F-250 Super Duty.

This net is made of 1" webbing with a multitude of attachment points and has a hefty 1,200 lb break strength.

expert reply by: Kyle S

1

Answer 1

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 2

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 3

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 4

Sounds like you need to redo the wiring of the new 4-way completely. Typically, the green wire runs to the right turn/stop circuit, the yellow runs to the left turn/stop circuit, the brown wire runs to the taillights and the white is the ground that…

view full answer...

Answer 5

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Answer 6

It sounds like you have a wishbone wiring harness install on your trailer. A regular 4-way wiring harness has 4 wires from the back of the connector, 1 for left turn/brake typically (yellow), 1 for the right turn/brake typically (green), 1 for the…

view full answer...

Answer 7

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 8

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

view full answer...

Answer 9

The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…

view full answer...

Answer 10

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 11

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 12

Sure thing; the JRV9000R is a double-din stereo so you can replace it with another double din, and for that I recommend the Jensen RV Stereo w/ DVD Player #JWM45. The #JWM45 is a 48 watt stereo that also has the DVD functionality and will fit in the…

view full answer...

Will 80" x 60" Cargo Net fit 2012 Ford F-250 Short Bed

Product Page this Question was Asked From

Continue Researching