Replacement EZ Loader Hub and Bearing Kit
Question:
Ez loader VIN 1ZEAAWNH02A057750 Can you tell me what hub and bearing kit fits this trailer?
asked by: Randy A
Expert Reply:
Unfortunately we don't have any way to look up parts from VIN numbers or Manufacturers. What I can help you with is determining what bearings you have through having you do a little research. If you pull one of your hubs and look at the seal there should be a number on the face. Then when you remove that seal there will be a bearing also with a number on the face. Then the outside bearing of your hub will have a number of the face as well. With those 3 numbers I can help you with replacement bearings or a replacement hub with bearings.
If you cannot determine the numbers, while you have that axle spindle exposed, use a digital caliper to take measurements on the spindle where the outer bearing, inner bearing, and seal sit on the spindle. Those measurements will serve as a way for me to get you the correct fit. I've attached a photo to assist.
The last thing I need is the bolt pattern of the hub you want. I've attached an article to assist.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels