Is Base Plate Kit All that is Needed to Connect to Tow Bar

Question

Question:

your #921-3 is that all I need for a complete install /from frame to tow bar ?

asked by: Larry P

0

Expert Reply:

To connect to a Roadmaster tow bar all you need is a base plate kit and your set. For that the Roadmaster MX part # 921-3 would be all you need in that regard. A very popular tow bar to use with this base plate is the Roadmaster Falcon part # RM-520.

expert reply by: Jameson C

0

Answer 1

There isn't a whole lot of trimming for either the Roadmaster base plate kit part #521441-1 or the Blue Ox part #BX1130 but the Roadmaster has the edge in my opinion as both require fascia trimming but the Blue Ox requires a reciprocating saw to…

view full answer...

Answer 2

Both the Roadmaster #1541-1 and the #1541-3 are compatible fits for your 2002 Honda CR-V, but these are the older crossbar-style so instead you'll want the Roadmaster Direct-Connect Base Plate Kit #1541-5. These direct-connect style base plates…

view full answer...

Answer 3

This base plate kit will work with the Roadmaster Falcon Towbar #RM-522. The Roadmaster Direct-Connect Base Plate Kit - Removable Arms, #1541-5 is a confirmed fit for the 2003 Honda CR-V. We do not have a video created for these base plates being…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV (discontinued) - Demco Tabless Base Plate Kit #DM77YV Both will fit your…

view full answer...

Answer 10

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

It sounds like you have a 7-way blade connector on your boat trailer as that is a very common connector on boat styles. This connector has 6 pins around the outside of the connector and a center pin for a total of 7. Part #A7WCB would be what a 7-way…

view full answer...

Is Base Plate Kit All that is Needed to Connect to Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching