How to Transport a 90 lb Canoe on the Roof of a 2017 Dodge Durango

Question

Question:

Thanks for your answer. After considering all of my options, (carrying the canoe gunwales up is not one of them as apparently that creates too much strain on the hull), I think I'll have to go with an aftermarket rack system, such as the one you suggest. My next question is, will it (or any other) fit on my 2017 Dodge Durango adjacent to the factory side rails without having to remove the factory side rails?

asked by: Dan F

1

Helpful Expert Reply:

I do have a solution for you but unfortunately there are no adapter kits available to carry your 38" wide canoe. You need to use a different roof rack system or use a canoe carrier.

For a roof rack system I recommend the Rhino-Rack Vortex Aero Roof Rack which includes 54" crossbars # RRVA137B-2, the 2500 Series Legs # RRRLKVA, and the DK Fit Kit # DK299. This gives you longer crossbars that have a max weight capacity of 165 lbs.

To carry your canoe just on the crossbars will also require a kit like the Thule # TH855XT.

If you would rather not swap out your current roof rack system then I recommend using the Swagman Exo Aero Rooftop Carrier # S65145. This has a 100 lb weight capacity and will do a great job of carrying your canoe but it will need to be with the gunwales facing up.

expert reply by: Jon G

1

click to enlarge

Dan F.

7/19/2018

Thanks for your answer. After considering all of my options, (carrying the canoe gunwales up is not one of them as apparently that creates too much strain on the hull), I think I'll have to go with an aftermarket rack system, such as the one you suggest. My next question is, will it (or any other) fit on my 2017 Dodge Durango adjacent to the factory side rails without having to remove the factory side rails?

Reply

Jon G.

7/19/2018

Typically the OEM crossbars would need to be removed in order to install an aftermarket system. I don't know where your current crossbars sit but I can give you measurements for where the Rhino-Rack bars will sit (which will be relatively the same for other brand roof racks). If you check out the attached picture you can see that the middle of the forwardmost crossbar will sit 3-16/16" in front of the center of your door jamb. The rearmost crossbar will sit 29-17/32" back from that same location. You can use these measurements to compare with your OEM crossbars.

Reply

Answer 1

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 2

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 3

Your older style Thule Hullavator is designed to fit Thule Aeroblade bars but it mounts to them in the channels that are on top of the bars and not by wrapping around them. The bolts needed are part #919061654 which then thread to the square nut…

view full answer...

Answer 4

Only the latest version of the Thule Hullavator part #TH898 is compatible with aero shaped crossbars. So your options at this point would be the new Hullavators and an aero shaped roof rack like you want (expensive I know...), or a square bar roof…

view full answer...

Answer 5

The brackets on the Thule Hullavator 897 and the Thule Hullavator 897XT are not the same. The first generation Hullavator was designed to only work with Thule square bars, so it will not work with your Thule WingBar Evo. The updated model, 897XT, was…

view full answer...

Answer 6

The gas struts for the Thule Hullavator 897XT are not available for replacement, unfortunately. So in order to replace the gas struts on your Hullavator, you're going to need to replace the entire assembly with the Replacement Arm Assembly for…

view full answer...

Answer 7

We have the Thule Force XT part #TH6356B which is 24-3/4 inches wide and has 11 cubic feet of cargo space. This would easily be narrow enough to also accommodate a kayak carrier. For that we have the Yakima JayLow part #Y04073 which is a J-style.…

view full answer...

Answer 8

The Thule Stacker #TH830 is a great solution to secure a few 10 foot kayaks on their side. The carrier does include a set of tie-downs but you will need to add extra straps #TH855XT and #753-2030-02 for all 3 of the kayaks. When actually securing the…

view full answer...

Answer 9

The Thule The Stacker - Rooftop Multi-Kayak Carrier Item #TH830 consists of a front and a rear part. So you get 2 uprights. A quantity of 1 in this case means 1 complete system; a front and rear! I have linked a video review of this carrier for you.

view full answer...