Do Wheel Stops Replace Wheel Chocks for Fifth Wheel Trailer?

Question

Question:

I have a triple axle fifth wheel RV. I’m looking at wheel stops. Do they replace wheel chocks? How many would I need?

asked by: Nathanael

0

Expert Reply:

The Camco Premium Locking Wheel Stop # CAM44662 is a replacement for a wheel chock; they serve the same purpose, which is to prevent movement of your trailer's wheels.

This particular wheel stop is for wheels that have between 3" and 10" of space between them and comes with a padlock to ensure security. I recommend a pair of them to ensure the axles are stabilized on both sides.

expert reply by: Kyle S

0

Answer 1

The Camco Premium Locking Wheel Stop w/ Ratchet Wrench #CAM44662 is sold individually and not in pairs.

view full answer...

Answer 2

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 3

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 4

Yes, the Extang E-Series Tonneau part #EX27UV does fit trucks that have spray-in bed liners and bed rail covers. The cover brackets can clamp to your bed rails without requiring trimming the cover as well.

view full answer...

Answer 5

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I went ahead and reached out to Lippert, and they confirmed that you need automatic transmission fluid Dexron III or Mercon 5 fluid. This works with their hydraulic auto leveling system. With that being said, I do not recommend using the hydraulic…

view full answer...

Answer 8

The formula you used is only a guess and wouldn't be an accurate way to determine your trailer's actual pin weight since it's a triple axle toy hauler. The only way to get an accurate number would be to measure at highway weigh station.…

view full answer...

Answer 9

I reached out to my contact at TST and confirmed that the TST TPMS - Color Display - Signal Booster - 6 Internal Tire Sensors #TST-507-INT-6-C you were looking at will work perfectly fine with the Counteract Balancing beads you use in your tires.…

view full answer...

Answer 10

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers #e96ZR. Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper…

view full answer...

Answer 11

If you have a working 4 pin trailer connector and a boat trailer with surge brakes, then you will not need a 4-pin wiring harness. If your trailers 5-pin connector is the flat style you can use the 4 Pole to 5 Pole Trailer Wiring Adapter, part…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Do Wheel Stops Replace Wheel Chocks for Fifth Wheel Trailer?

Product Page this Question was Asked From

Continue Researching