Do 3,500 lb Timbren Axle Less Kits Use 3,500 lb Trailer Hub/Drums
Question:
Hello. I just purchased a 1986 fleetwood travel trailer. Id like to get rid of the old style 4 lug wheels and put a more modern 15 inch wheel. Someday I may want to seriously upgrade the axles and suspension to timbren axle less or similiar. My question is if i buy the dexter 10” self adjusting brakes and drums now can I install on the existing Dexter 3500 lb axle and then remove those assemblies later to install on new Dexter ez lube axles or timbren axle less kit? Thanks
asked by: William F
Expert Reply:
So what's interesting about the 3,500 lb Timbren Axleless systems is that the spindles they come with are designed to fit 5,200 lb hubs and assemblies. So if you were to install new hub/drums and assemblies on your Dexter 3,500 axle now you'd want the version fo the Timbren Axle Less 3,500 that comes with hub/drums part # A35RS545E as the parts would not carry over.
For hub/drums to fit a 3,500 lb Dexter axle you'd want the part # AKHD-5475-35-K and then for assemblies part # AKEBRK-35L-SA for the left hand side and part # AKEBRK-35R-SA for the right hand side.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Axle for 1968 Shasta Camper
- Q&A: Replacement Tail Lights for a 1977 Shasta 1600 Trailer
- Q&A: 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch Receiver
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Lighting Requirements
- Q&A: Will Roof Rails Work On a Teardrop Trailer T@B
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: Installation Instructions for Advent Air Rooftop RV Air Conditioner # ACM135