Recommended Bearing Kit for 1995 Ravens Trailer with 3,500 Pound Axle
Question:
Hi Folks, I have a 1995 Ravens 5x8foot aluminum utility trailer with a 3500# torsion axle. I want to replace the bearings, races and seals but need to know what the correct bearing kit would be. Can you help? Thanks ever so much,
asked by: PJ
Helpful Expert Reply:
Most likely your 1995 Ravens Utility Trailer that has a 3,500 pound axle uses # L68149 for the inner bearing and # L44649 for the outer bearing. You can pull one of your hubs to confirm this by simply checking for the numbers that should be stamped inside the bearings themselves. You can also measure the spindle at various locations where the bearings sit if you are unable to read the numbers.
For a complete bearing kit that includes these bearings, the 10-19 grease seal (1.719 inch inner diameter, 2.565 inch outer diameter), races, cotter pin, and tang washer, you will use the Bearing Kit # BK2-100.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels