Running Boards or Steps for 2017 Ram Promaster 2500 Van

Question

Question:

I want to install these inside the sliding side door of my van. Big question is will the door still be able to slide closed. It moves inward about 3-4 inches when closed.

asked by: Alon B

0

Expert Reply:

You would not be able to install camper steps such as LC678041 in your 2017 Ram ProMaster 2500 van, though we do have some options for you.

I recommend the Carr Slide-Out Step # CARR501090 to mount along the side of your van. It will stow beneath your van when not in use so you do not have to worry about taking up space along the inside of your van.

expert reply by: Kyle S

0

Answer 1

The Carr Step for Cargo Vans - Grated Steel Platform - Galvanized - 24" Long - 500 lbs #CARR501090 is a fit for your 2016 Ram ProMaster 1500. The step releases when you push it from the outer edge with your foot, so if you want it in…

view full answer...

Answer 2

At around the 1:40 mark on the attached installation video for #BBS-1103, you can see that the Bully Black Bull Side Steps mount on a little over 8 inches on center. These are designed to fit a wide range of vehicles, but your 2018 Ram ProMaster…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 5

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 6

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 7

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Running Boards or Steps for 2017 Ram Promaster 2500 Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching