Front and Rear Stake Pocket Anchors to Fit a 2016 Chevrolet Silverado 1500

Question

Question:

Hi I’m looking for some stake pocket anchors for a 2016 Silverado 1500. The two rear holes are weird shaped and I wasn’t sure which worked with them.

asked by: Walter

0

Expert Reply:

The rear stake pockets in your 2016 Chevy Silverado 1500 are shaped different than most. We carry specific anchors for them, part # P99914.

Then for the standard shaped front pockets part # P99901 will match the others.

expert reply by: Charles S

0

Answer 1

I recommend the nifty Putco Pop up Anchors, part #P99901. This is a universal fit item designed to fit most pickup trucks with the exception of GM New Body trucks, which it does not sound like you have. They are secured in the stake bed pocket by…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 4

The TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 #TLS9529-2-LK comes with the keyed alike locks, so one key will work for all 4 locks. You will get 4 keys, but you can use 3 of them as spare…

view full answer...

Answer 5

I reached out to TorkLift and they told me that while the FastGun turnbuckles do not have a specific weight capacity in regards to the camper, they are designed to hold down a camper at the anchor point with 300 lbs of pull-down force per turnbuckle…

view full answer...

Answer 6

Which hitch do you have on your truck? The correct rear tie-down will depend on if you have a factory, a TorkLift hitch or a hitch from a different manufacturer. Let's begin by ensuring you have the correct rear tie-down fit for the hitch you…

view full answer...

Answer 7

Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the #TLF2021 and #TLF3008 that you referenced!

view full answer...

Answer 8

I believe the Clearance Light part #MC65RB would be the correct light for you. The difference in length is about .1 of an inch which would be close enough. Especially since these look exactly like what you have and the other dimensions match up. The…

view full answer...

Answer 9

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

view full answer...

Front and Rear Stake Pocket Anchors to Fit a 2016 Chevrolet Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching