Lock Cylinders Needed for the Thule Crossroad Foot Pack 450

Question

Question:

What is the model # of the cylinder core that fits a set of 4 thule 450 foot packs Please advise Thanks

asked by: Jeff L

0

Expert Reply:

The 4 pack lock cylinders # TH450400 is what you want to add locks to the (discontinued) Crossroad Foot Pack 450. Thule lock cylinders are actually universal so if you end up getting a new vehicle and you need a different foot pack you can simply take the included change key to move the cylinders.

expert reply by: Jon G

0

Answer 1

For your 2017 Honda Accord Sedan, the roof rack consisting of the Thule WingBar #TH711420 that replaced the AeroBlade, the feet #TH480R, and Fit Kit #THKIT1720 you mentioned will install with the closest part of the front foot 11 inches back from…

view full answer...

Answer 2

Yes you can trim down the ends of the Thule ProBar Evo Crossbars #TH713600 that you referenced to shorten them as needed.

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Answer 6

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 7

If you have the older version of the Thule T2 Classic (pre 2012) then you can replace your ratcheting arms with part #752-1272-001 which has an overall length of 31-1/2" and will accommodate your 29" bike tires. If you check out the…

view full answer...

Answer 8

The roof rack I recommend for a 2023 Kia Sportage with bare roof is the Thule WingBar Evo Crossbar System composed of part #TH711400, part #TH710501, part #TH145050. This system uses custom fit door clips which clamp onto the door sill for a tight,…

view full answer...

Answer 9

To mount your Sears X-Cargo to your Ford Escape, you're just going to need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603.

view full answer...

Answer 10

Definitely a smart idea to double-check, and yes, I can verify for you that the Malone roof rack and Hullavator Pro kayak carrier are 100 percent compatible and will indeed work together. The correct part numbers for the two are the following: -…

view full answer...

Answer 11

We do have the rubber strips for both the top and bottom of the Malone AirFlow2 crossbars. There are 3 different size bars with a top and bottom strip for each listed below. 50" Malone AirFlow2 Roof Rack #MPG215 Top Strip #MAL63TR Bottom Strip…

view full answer...

Answer 12

That all depends on what roof rack you have or that you are looking at. The Thule Hullavator Pro #TH898 itself weighs in at 39.7 lbs but that is not including any roof rack parts. If you could verify which roof rack you have I can let you know the…

view full answer...