How to Find the Correct Bearing Kit for a 2000 Fleetwood Pop Up Camper
Question:
What is the correct bearing kit for a 2000 Fleetwood pop up camper, sold as a Coleman Seapine.
asked by: Kevin P
Expert Reply:
Pop up campers are lighter trailers so a 3,500 lb axle wouldn't be uncommon but it is always best to check just to make sure. If you don't know what the weight rating is for your axle you can typically find this stamped into the middle of the axle. Should you have a 3,500 lb axle then the Bearing Kit # BK2-100 which is for a #84 spindle should be what you are needing.
If you are unable to find out your axle weight rating or if you already pulled your hub you can also check your bearings and grease seal and match them up. The Kit # BK2-100 that I mentioned above includes the inner bearing # L68149, outer bearing # L44649, and grease seal # 58846 which has an inner diameter of 1.719" and an outer diameter of 2.565". You can use a digital caliper to verify the measurements of your spindle (see attached picture) if you cannot find part numbers.
Let me know if you have different bearings or if you have a different axle weight capacity and I can recommend a different kit.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels