Will the Stromberg Carlson Tray Part # CC-255 Work with an Equal-i-zer Weight Distribution System
Question:
Thank you for emailing back to me. I have other question about the hitch tongue weight. The max is 530 lbs and I did calculated all the weight Tongue Weight was about 405 lbs including tray generator and gas tank 1 gallon). It looked like the tray is compatiable. But if you see the pictures of the base triangle that I wasn't sure to install by myself. I would remove the black tube behind the propane if the tray block. Please advice. Thank you.
asked by: Wendy
Expert Reply:
No, the Stromberg Carlson Trailer Tray Cargo Carrier part # CC-255 would not interfere with the frame brackets on any of the Equal-i-zer Weight Distribution Systems. The reason for this is because of its wide range of adjustability. The Equal-i-zer system's frame brackets will install 27" - 32" back from center of coupler whereas the Stromberg Carlson bracket's can install anywhere on the a-frame where the rails are between 12" - 52" apart. There may be some adjusting or rearranging of propane tanks but nonetheless should work well for you.
I have attached a photo of the tray installed with the frame brackets of a similar weight distribution system left on to give you better idea of what I mean by the above.
Product Page this Question was Asked From
Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - 300 lbs
- RV Cargo Carrier
- Cargo Tray
- A-Frame Trailer Mount
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 94716
- Shop: Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - 20,000 lbs
- Search Results: gooseneck pin box
- Q&A: Is There a Replacement for a Trimark 030-0900 Door Latch
- Q&A: Safety Cables for a Roadmaster Falcon Tow Bar
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster EZ Hook Safety Cables - 68" Long - 8,000 lbs - Qty 2
- Shop: Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC - 25,000 lbs
- Shop: Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches - 2-5/16"
- Shop: Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Fifth Wheel Hitch
- Shop: B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
- Search Results: 90160
- Video: Choosing the Best Fifth Wheel Hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Video: Review of B and W Fifth Wheel - Fixed Fifth Wheel - BWRVK3775
- Search Results: base plates
- Article: Trailer Wiring Diagrams
- Video: B and W Patriot 5th Wheel Trailer Hitch with Slider Review
- Shop: Vehicle Tow Bar Wiring
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Search Results: gooseneck hitch
- Q&A: Which Bumpers Can I Flat Tow a Jeep Wrangler JLU With Using D-Ring Adapters
- Shop: Gooseneck Hitch
Wendy
6/18/2018
Thank you for emailing back to me. I have other question about the hitch tongue weight. The max is 530 lbs and I did calculated all the weight Tongue Weight was about 405 lbs including tray generator and gas tank 1 gallon). It looked like the tray is compatiable. But if you see the pictures of the base triangle that I wasn't sure to install by myself. I would remove the black tube behind the propane if the tray block. Please advice. Thank you.