How to Choose a Spare Tire for Trailer

Question

Question:

I have a 2017 coleman 274BH lantern conventional and want to make sure this is proper spare for me before I order it.

asked by: Robert F

0

Expert Reply:

We do not have lists of parts or sizes on each year, make and model of trailer, so you will need to know your 2017 Coleman's wheel bolt pattern; if you do not know this I have added a link to a help article which explains the best way for you to determine that pattern so you can match it with the 5 on 4-1/2" bolt pattern of the Karrier # AM32161.

expert reply by: Kyle S

0

Answer 1

To determine what replacement bearings you will need for your 1998 Coleman Rio camper you will need to take your hub off and either find the part numbers that are on the bearings and grease seal or use a Digital Caliper #17068 to find the inner…

view full answer...

Answer 2

The Kenda Karrier ST205/75R14 Radial Tire #AM32161 with the 14" White Spoke Wheel - 5 on 4-1/2 tire combination is my recommendation for the heaviest rated 14 inch tire and wheel combination. The max load on this tire & wheel is…

view full answer...

Answer 3

The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel #AM32161 is not machine balanced - nor are any trailer tire and wheel combos. That said, it will be ready to install when you receive it. What happens is the manufacturers line…

view full answer...

Answer 4

Sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the capacity of your trailer, and has the same bolt…

view full answer...

Answer 5

You have the correct parts selected for your Dexter EZ Lube axles. The Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal, item #BK2-100, contains the Inner bearing and race, outer bearing and race, grease seal and cotter…

view full answer...

Answer 6

Thanks for the picture! There is going to be a noticeable benefit to having larger tires on dirt roads that are poorly maintained. The larger tires will give you a wider footprint by almost 30% which translates to more stability and grip. The Kenda…

view full answer...

Answer 7

The inner diameter of bearing #L44649 is 1.063 inches. The inner diameter of bearing #L68149 is 1.378 inches. Both fit on a #84 spindle. The matching race for bearing L44649 is #L44610. And the matching race for bearing L68149 is #L68111. These…

view full answer...

Answer 8

The pilot hole on a wheel is the big center hole right in the middle of the wheel. It fits over the hub.. It can be tough to measure these with the wheel still on the trailer so you will want to remove the wheel and then it will be easier to measure.…

view full answer...

Answer 9

The pilot diameter is measured as the diameter of the large hole in the center of the wheel. The Dexstar #AM20790 steel dual trailer wheel you referenced has a 4.88 pilot diameter. So which pilot diameter would you need? To figure that out, I would…

view full answer...

Answer 10

The 6 inch wide Dexstar Steel Spoke Trailer Wheel, #AM20532, will work well on your Puma 23FB travel trailer and with the Maxxis tire that you referred to, if you trailer hubs are lug centric hubs. This wheel has a Pilot diameter of 4.27 inches, so…

view full answer...

Answer 11

We do have an option for you; the Americana Trailer Wheel Center Cap #AM90175 which will fit on 14" diameter wheels with a 5 bolt pattern. I recommend you measure the wheels pilot diameter and verify that it matches the pilot diameter of these…

view full answer...

Answer 12

I do have some great options for you to choose from but I don't think all Wells 16' Cargo Trailers use the same size wheels/tires so I can't make an exact recommendation as I don't know what you have. That said, all you have to do is…

view full answer...

How to Choose a Spare Tire for Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching