Trailer Hitch Recommendation for 2017 Honda CR-V for Towing Tear Trailer
Question:
I plan to purchase a hitch for a 2017 EX-L Honda CRV. I will haul a tear trailer. The ones Im looking at range in weight from 1100 lbs to around 1400 lbs. The CRV is rated at 1500 lbs. Since I live in N Utah and will travel through mountains should I try to stay well below the 1500 limit or would it be able to handle one close to 1400? Thanks
asked by: Richard
Expert Reply:
The towing capacity for your 2017 Honda CR-V takes into consideration areas of the country that have mountains like where you live. I'd recommend going lighter but 1,400 lbs would be fine too.
For a hitch the Draw Tite part # 76128 would be what I recommend as it is a 2 inch hitch with plenth of capacity. For trailer wiring you'd then want the # 118741 which is a custom fit. I attached install videos for both of these products for you to check out as well.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does the Curt Hitch C13397 Fit the 2024 Honda CR-V Hybrid?
- Q&A: 4-Way Trailer Wiring Harness For 2024 Kia EV6
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Tire Sizing
- Q&A: Replacement Air Conditioner for RV Duo Therm 57915.531
- Article: Trailer Wiring Diagrams
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Where do the Springs Install on a 16K Reese 5th Wheel Trailer Hitch
- Q&A: 2 Inch Hitch Receiver for a 2022 Honda CR-V Hybrid Touring
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Roof Rack Information
- Article: Rust Prevention