Receiver and Hitch Pin Hole Depth on EcoHitch HIdden Trailer Hitch Receiver # 306-X7601

Question:

I am looking at the ecohitch 306-x7601. Is there a spec sheet available? I am looking for the depth of the 2 x 2 tube that you mount the ball receiver into, and how far back is the hole drilled into the 2 x 2 tube? Thanks

asked by: Sheri A

Expert Reply:

The EcoHitch Hidden Trailer Hitch Receiver # 306-X7601 referenced in your question features a depth of 5-5/8 inches on the 2 inch receiver. The center of the hitch pin hole is located 2-1/2 inches behind the front edge of the receiver. I have attached an image with these dimensions labeled that you can also check out.

This is a really nice Class III hitch that is designed to fit the 2015 to 2018 Subaru Outback Wagon. It has a hidden cross tube that will install behind the vehicle's rear bumper, providing a really sleek look that only leaves the receiver visible beneath it. It has a towing capacity of 3,500 pounds and a tongue weight capacity of 525 pounds, although you will still need to go by your vehicle's limits if they are lower. This can be checked by looking through your copy of the vehicle's owner's manual.

expert reply by: Chris R