Can the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21741 be Installed on a Flatbed Trailer
Question:
We have a lightweight 140 pound fishing boat that is 10foot long and 50inch wide. We want a trailer that can fit in the garage, so weve come up with using a folding flatbed trailer that will fit in the garage. But to make loading and unloading easier, were thinking of using rollers on the bed and using ramps to get the boat to the water. Can we use these rollers on a flatbed trailer without damage to the boat and would it assist getting the boat easily into the water? And can you install these rollers on aluminum loading ramps?
asked by: Sue H
Helpful Expert Reply:
The Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21741 are designed to be installed on bunk boards or brackets like part # DL21742 but if your boat will fit on the rollers without them needing to be at an angle then I see no reason why it wouldn't work for your application. If you check out the attached picture you can see how a customer installed these on a loading ramp that they constructed.
I would try to avoid installing these on aluminum ramps. Steel and aluminum don't react well together and you will likely start to see corrosion build up fairly quickly especially when water is put into the mix. Please note that these rollers have a weight capacity of 3,000 lbs.
Products Referenced in This Question
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- Zinc-Plated Steel
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Q&A: Can I Convert Regular Bunks To Roller Bunks
- Q&A: How Far Should Rollers Install Behind Rear of Trailer Frame
- Q&A: Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
- Q&A: Do Roller Bunk Brackets DL21742 Require 7/16" U-Bolts?
- Q&A: Recommended Roller Bunks For Tracker Deep V Boat
- Q&A: Will Using Roller Bunks on a Boat Trailer Damage the Boat
- Article: Trailer Lighting Requirements
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Best Ladder Racks
- Article: RV Cell Boosters, How Do They Work?
- Article: Best Boat Trailer Jacks