Hub Assembly Needed for Bearings with 0.75 and 1.25 Inner Diameter
Question:
Hi I need a hub assembly for my boat trailer inside of the outside bearing is 3/4inch the inside of the inside bearing is 1 1/4. Do you have this
asked by: Daniel S
Expert Reply:
If the inner diameter of your bearings are 0.750" and 1.250" then we do have a few hubs for you to choose from. It is important to make sure that a digital caliper like part # PTW80157 be used to get an exact reading to the 2nd decimal place (1.23 for example).
For the measurements you gave we have the Trailer Hub Assembly # DX22XR which has a 5 on 4-1/2" bolt pattern and a seal inner diameter of 1.688" as well as the Redline Trailer Hub Assembly # AH15450ECOMP which has a 4 on 5" bolt pattern and a seal inner diameter of 1.50".
The Titan is typically used for 2,500 lb trailer axles while the Redline is rated for 3,000 lb axles. Both assemblies come with the bearings, grease seal, and a grease cap. I have attached review videos for you to check out.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Replacement For Titan Trailer Hub 17214
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Demco Highjacker Mounting System For a 2021 Chevrolet Silverado With 6-3/4' Bed Without OEM Puck Pkg
- Article: How to Measure a Trailer Axle
- Q&A: Recommended Axle To Replace Older AL-KO T44 With Discontinued Braking Assemblies
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Using a Portable Generator on RV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing