Hubs, Drums, Brakes and Spindle for a 2,000 lb Trailer Axle
Question:
Hello, Please tell me if the products below work together Brake AKEBRK-2 Drums AKHD-545-2-EZ-2K Spindles TRU44FR I also need the right flanges to mount the brakes Thank you very much.
asked by: Gian P
Expert Reply:
Yes, the Electric Trailer Brake Kit, # AKEBRK-2, the Trailer Hub and Drum Assembly, # AKHD-545-2-EZ-2K, and the EZ Lube Spindle, # TRU44FR, will work together. The brake mounting flange that you will want for this setup is part # 4-34 which should be welded to the end of the axle tube just behind the spindle. The flange must be welded perfectly square to the axle tube to ensure that the correct angle is kept with the camber of the axle tube, so be sure to have an experienced and qualified welder on hand.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Where to Find Serial Number of Truxedo Tonneau for Replacement Tarp
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Weight Capacity of Dexter P-12 SLR SN: D5287869 Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Which Grease Seal for Trailstar Boat Trailer
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Rust Prevention
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs