What is the Correct Bearing Kit for a 1992 Fleetwood Prowler M-19E Trailer
Question:
Need new bearings for my 1992 prowler 19E. I can read the product number on the inner bearings but not the outer bearings. The inner is L68149. The 6 could be an 8, the top is kind of cut off. Your bearing kit # 84 is the only one with the L68149. Based on the trailer make and model and what I can read of the inner bearing is this the kit for me?
asked by: Mike
Expert Reply:
If the number on the outer bearing is not legible then you will want to take a digital caliper and measure the spindle where the bearing seats to the nearest thousandth of an inch. If this measurement is 1.063" then the Bearing Kit for #84 Spindles part # BK2-100 would be correct for you.
If the part of the spindle where the outer bearing seats does not measure to be 1.063" then I would need to know what that measurement is in order to recommend the correct bearings for your 1992 Fleetwood Prowler M-19E trailer. However, the #84 spindle is very common therefore I do believe this is the correct kit for you but it will be worthwhile to measure first.
I have attached a review and install video on the above bearing kit for you as well.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels