Dimension of SuperSpring Solo Helper Springs for 2011 Ford F-250

Question

Question:

sumospring 114-54 i have 11 f250 w helper springs already i wanted to know total height frame to botom of spring to se if i sag enough to use

asked by: Kevin B

0

Expert Reply:

The SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-114-54 measures 5 inches including the bracket according to my contact at SuperSprings. They are designed not to be engaged when you are without load but to progressively control load as they compress. They are made of high-density Microcellular urethane so they are maintenance free.

expert reply by: Jason S

0

Answer 1

For your 2020 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-114-54 and the 1,500 lb kit part #SSR-114-54. Basically you want to go with the lightest duty…

view full answer...

Answer 2

There is jounce spring suspension enhancement for your 2004 Ford F-350 but the Firestone WorkRite has been discontinued for some time now. For jounce-style spring suspension on your '04 F-350 similar to the WorkRite I recommend the…

view full answer...

Answer 3

You can totally handle the install of the SumoSprings Solo Custom Helper Spring Kit #SSR-114-54 in your 2008 F-250 4WD that has the B&W gooseneck hitch installed. The USA-made #SSR-114-54 is a bolt-on kit that needs no drilling. You'll simply…

view full answer...

Answer 4

I have a solution for you, but the Sumo Springs are only sold in pairs, so you would need to purchase a complete kit using part #SSR-114-54. While failure of these is fairly unlikely, they can get damaged occasionally and need replacement, so doing…

view full answer...

Answer 5

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 6

The correct SumoSprings Solo Custom Helper Springs for a 2016 Ford F-250 is part #SSR-114-54. The SumoSprings will do a great job of reducing rear squat while towing or loaded but no suspension enhancement system would guarantee to completely…

view full answer...

Answer 7

I spoke with my contact at SumoSprings and he informed me that the dimensions of the #SSR-127-54 are 10-3/4 x 7-1/4 x 4-1/2 inch. Just the yellow portion of the spring is 7 inches tall.

view full answer...

Answer 8

The Timbren Rear Suspension Enhancement System, part #TFR250SDG is the correct system you need for your 2016 F-250, whether it is a 2WD or 4WD. There is no drilling required for installation and this system can be used on trucks with or without the…

view full answer...

Answer 9

For your 2016 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-114-54 and the 1,500 lb kit part #SSR-114-47. Basically you want to go with the lightest duty kit…

view full answer...

Answer 10

For your 2013 Ford F-250 the best SumoSprings is the part #SSR-114-54 which was designed to fit with fifth wheel rail kits and provides 2,800 lb of additional support which will help when towing your trailer.

view full answer...

Answer 11

We do have SumoSprings that fit your 2004 Ford F-250 4WD and are compatible with a gooseneck hitch, though the part number you mentioned is actually only a fit for 2-wheel drive trucks. So instead, what you will want are the following springs: -…

view full answer...

Answer 12

The rubber springs on the Timbren Rear Suspension Enhancement System, #TFR250SDG, measure 4-1/2 inches tall and this system has been confirmed to fit your 2011 Ford F-250 Super Duty. I have included the installation video for you.

view full answer...

Dimension of SuperSpring Solo Helper Springs for 2011 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching