Is the MaxxAir Mini Trailer Roof Vent # MA00-03700 Plastic or Metal

Question

Question:

Thanks guys. Do you have this mini vent in black or any other colors besides white?

asked by: Bret C

0

Expert Reply:

The MaxxAir Mini Trailer Roof Vent # MA00-03700 that you referenced is made out of a durable plastic that actually does a really good job against the sun.

If you wanted a total metal vent then you could use the Ventline Ventadome Trailer Roof Vent # V2110SP-24 which is also a manually operated vent. The thing about this kit though is that it will keep out bugs and debris when left open but not rain. To keep it open while it is raining you would need to use a cover like the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066...which is made of plastic.

I recommend going with the Mini since plastic will also do a better job at resisting corrosion than the metal would.

expert reply by: Jon G

0

Bret C.

5/29/2018

Thanks guys. Do you have this mini vent in black or any other colors besides white?

Reply

Jon G.

5/29/2018

Yes we do! It is listed as part # MA00-03750 on our site.

Reply

Answer 1

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 2

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 10

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Is the MaxxAir Mini Trailer Roof Vent # MA00-03700 Plastic or Metal

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching