Recommended Grease Seal for Dexter Trailer Axle Beam # 7461121
Question:
I was looking at buying 7461121 and was wondering what grease seal I would need? The od on my hub is 3.376” but I cannot find what the od of the shaft is on the axle. Thank you!
asked by: Richard K
Expert Reply:
The Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs # 7461121 will use a grease seal is the inner diameter of 2.25 inches. The outer diameter is the 3.376 you mentioned, so for this combination the seal is # 10-63.
If you want complete hub assemblies including bearings races and seals needed compatible with that axle, I recommend the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ which is a confirmed fit and braking assemblies # AKEBRK-7-SA. If you want the hub without a drum for braking, I recommend # 8-213-5UC1-EZ which is a confirmed fit.
Products Referenced in This Question
Unitized Oil Seal for Trailer Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Wet Shackle Bolts to Reduce Noise from Tandem Axle Travel Trailer Suspension
- Q&A: Replacement Trailer Clearance Light for PM150
- Q&A: What Colors are Trailer Brake Magnets Wires
- Q&A: Checking Electric Trailer Brake Magnets for Wear, Shorts, Amperage, and Resistance
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Q&A: Why Would New Trailer Brakes Feel Weak After Axle Replace
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Trailer Axle Recommendation for a 4 by 8 Utility Trailer
- Article: Trailer Tire Sizing
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: Brake Controller Installation on a Ford Super Duty Truck (2005-2007)
- Article: How to Measure a Trailer Axle