Locking Hitch Pin Recommendation for Larger Hitch Sizes

Question

Question:

I have a 2107 Ford F-250 Super Duty Pick Up. It comes with a oversized hitch but includes a reducer to make it compatible to 2inch hitches. Is the locking pin long enough to go the hitch and reducer? Frequently I run into this problem.

asked by: Scott R

0

Expert Reply:

The Fastway Hitch lock part # FA86-00-3160 is designed for the larger hitch sizes like what you have so it would be a great option.

expert reply by: Jameson C

0

Answer 1

That's a good question, and there's an interesting reason why there are the long holes on the side of the etrailer Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch #e28JR. Using a regular reducer sleeve requires you to…

view full answer...

Answer 2

The Replacement Lens for RVSTL60 Tail light #AST60B is 8-11/16" long. Another option we carry for a replacement lens is Replacement Tail Light Lens for RVST50 AST50B which measures 8-5/8" long.

view full answer...

Answer 3

Yes, you'll need the TorkLift Talon Camper Tie-Downs - Front #TL36CR and rear #TLF3008A. To secure your camper to the tie-downs you can use the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs #TLS9020

view full answer...

Answer 4

Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I strongly agree with you not…

view full answer...

Answer 5

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Answer 6

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

view full answer...

Answer 7

The OEM brake switch on your 2022 Jeep Wrangler is not usable for this purpose. You will need to use a brake light switch #RM-751490. This will send the proper signal to the supplemental braking system. I have linked our review and install video…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

I looked up the specifications for your Rockwood Mini Lite 2509S and was able to confirm the 25'9" length x 96" width x 10'11" height that you provided. Based on these dimensions, I recommend the Adco Olefin HD RV Cover for…

view full answer...

Locking Hitch Pin Recommendation for Larger Hitch Sizes

Product Page this Question was Asked From

Continue Researching