Trailer Hitch Recommendation for 2018 Nissan Pathfinder

Question

Question:

I need to set up my 2018 pathfinder for towing. Is this everything I need: Receiver: 76031 Wiring Harness: C56357 Are these items compatible and will I need any other components or hardware? Thank you

asked by: Suzann D

0

Expert Reply:

To set up your 2018 Nissan Pathfinder for towing, you are off to an excellent start. The Draw-Tite Max-Frame # 76031 is a confirmed fit. Then the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56281 will give you the trailer wiring you need.

You will also need a product like part # PC3, part # e98880, or part # 63232 to secure the accessory in your 2" trailer hitch receiver. For a ball mount I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

expert reply by: Jason S

0

Answer 1

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 2022/2023 Coleman 17B travel trailer. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of 8,000lbs. With a dry tongue weight of 385lbs by the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Depending on the length of your crossbars and the width of your bed yes, there is a way to mount the Yakima OutPost HD ladder rack system on your utility trailer. What you're going to need are the Yakima HD Tracks, like the 60"…

view full answer...

Answer 4

I have attached an image from the operation manual for the Demco Hydraulic Brake Actuator #DM8669112 that details how to bleed the brakes. The process consists of first elevating the trailer tongue about 4 to 6 inches and then loosening or removing…

view full answer...

Answer 5

First of all did this problem just start happening? If the trailer has always worked fine before on the same truck then it's likely a short on the trailer's brake wiring. I would start by cleaning the connector and make sure it's free of…

view full answer...

Answer 6

Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76031 installed. However, in order to activate this feature you will need to place your foot on…

view full answer...

Answer 7

All 2013 Nissan Pathfinders came pre-wired for a tow package, so we know your Pathfinder at least has something. If your Pathfinder came with the tow package option from the dealer, then you would have a trailer hitch and trailer wiring at the back…

view full answer...

Answer 8

The best custom rail kit with the highest capacity for your 2022 Ford F-150 is going to be the Curt Custom Fifth Wheel Installation Kit for Ford - Gloss Finish item #C93WR. These custom brackets mount beneath your truck bed to provide attachment…

view full answer...

Answer 9

All 2020 Nissan Pathfinders come from the factory prewired for a brake controller and a 7-way trailer connector, though it might lack the 7-way and the relays needed to activate the tow package. You will need a brake controller. If your vehicle…

view full answer...

Trailer Hitch Recommendation for 2018 Nissan Pathfinder

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching