Rear Mud Flap Recommendation for 2018 Ford Super Duty without Fender Flares

Question

Question:

I attached picture of my truck. Let me know if I have fender flares or not.

asked by: Alan

0

Expert Reply:

The WeatherTech Mudflaps part # WT120065 that you referenced fit these vehicles (as of May 2018):

2017 - 2018 Ford F-350 Super Duty non-Dually without add-on fender flares
2017 - 2018 Ford F-250 Super Duty without add-on fender flares

If you have fender flares then these would not be what you'd want and instead you'd want the # WT120066.

Looking up pictures of the Lariat trucks in your range some have the flares and others don't. The flares look like they are bolted on to the side of the fender. So since you said yours are "molded" I believe you have a "non-flare" model and would need the # WT120065 that you referenced.

expert reply by: Jameson C

0

click to enlarge

Alan

5/21/2018

I attached picture of my truck. Let me know if I have fender flares or not.

Reply

Jameson C.

5/21/2018

Thanks for the picture! I forwarded this to WeatherTech to make absolutely sure and they confirmed that your truck does not have the fender flares so the correct Mudflaps are # WT120065.

Reply

Answer 1

The WeatherTech Mud Flaps #WT120065 will hang about 4-1/2" further down from the fenders on your 2019 Ford F-350 Super Duty according to my contact at WeatherTech. Attached is an installation video of this kit on a 2019 F-350 for you to…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Rear Mud Flap Recommendation for 2018 Ford Super Duty without Fender Flares

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching