Are Safety Chains Also Required on a Tow Dolly When Using a Roadmaster Wheel Net

Question

Question:

Is it safe to just use tire straps or does a safety chain also need to attach vehicle to car dolly? Very important thank you very much.

asked by: Danny R

0

Expert Reply:

If you used a Roadmaster Adjustable Wheel Net # RM-2150 on both of your front wheels you would not necessarily need to use safety chains as these will provide an additional attachment point to the wheel chocks that are on the tow dolly already.

expert reply by: Jameson C

0

Answer 1

The bulb type that the Roadmaster replacement light #RM-300220-20 uses as a replacement is the 194 which we have as the part #A194B. The replacement light #RM-300220-40 uses a 1157 like #A1157B for the stop/tail and then a 1156 like the #DI85VR…

view full answer...

Answer 2

Lithium and standard batteries do require different voltages to charge so yes you would need to go to a converter that is designed for use with Lithium batteries. For that we have the Progressive Dynamics Inteli-Power RV Converter and Battery…

view full answer...

Answer 3

The Erickson Adjustable Ratcheting Wheel Net with Hooks, #EM58522, may be an option for you. This wheel net has a working load limit of 3,333 lbs and fits 14 to 29 inch tires. I have included a short video for you.

view full answer...

Answer 4

The #317-18900 would work well on a trailer, but more than likely your tow dolly uses specific straps with a different hook to secure your vehicle to it. Even if you previously had this style, I know a few do, I can't guarantee that it will…

view full answer...

Answer 5

Yes, the Replacement Wheel Net for Roadmaster Tow Dolly part #RM-2150 will be correct in order to secure your 255/75-15 tires onto the Roadmaster Tow Dolly with Electric Brakes part #RM-2050-1. This wheel net works with tires up to 30"…

view full answer...

Answer 6

If you already have an e-track installed, my recommendation would be the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs, part #77314. It is a wheel net designed to specifically work with e-tracks. The straps come individually and it…

view full answer...

Answer 7

The Roadmaster Tow Dolly with Electric Brakes part #RM-2050-1 uses wheel straps to secure the vehicle, there are no safety chains nor are they needed. There are however safety chains which secure the tow dolly to the towing vehicle which are required…

view full answer...

Answer 8

I have an answer for you. I went ahead and reached out to my contact at Demco, and he said that depending on the ratchet-style you have on your 2019 Stahl dolly, you might need a different style of strap than the Demco Strap #DM03528-93 to fit your…

view full answer...

Answer 9

I do have an option that will allow you to use a bike rack on the rear of the vehicle while towing a tow dolly, however, there currently are not any dual hitch adapters that will allow you to use a 10" drop ball mount and remain within your…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Are Safety Chains Also Required on a Tow Dolly When Using a Roadmaster Wheel Net

Product Page this Question was Asked From

Continue Researching