Do Reese Ball Mounts Fit in Curt Hitches

Question

Question:

There seems to be a little bit of play in there.

asked by: Mark P

0

Expert Reply:

Reese ball mounts can fit Curt hitches without an issue. What you attached a picture of looks normal. There sometimes can be play sometimes between the shank of the ball mount and the hitch though which can be removed with an anti-rattle device. We have the hitch lock/anti-rattle device part # 63232 which would work well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 3

Thanks so much for the photos, they were very helpful. To replace all four cradles, what you need is two of the Replacement SuperCush Anti-Sway Cradle and ZipStrips #8880598 (which has the upper and lower ZipStrip) along with two of the Replacement…

view full answer...

Answer 4

I contacted Yakima and sent them your photos. If the knob is just spinning then you would need to replace the shank. They took a look at your photos and the only way to repair the Yakima Highlite is to use the Replacement Mast with Anti-Rattle Knob…

view full answer...

Answer 5

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

view full answer...

Answer 6

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 7

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…

view full answer...

Answer 8

It will not, no.

view full answer...

Answer 9

The advantage of a folding carrier like part #e98874 is, obviously, that it it can fold up for rear clearance when you don't have anything loaded on it. The disadvantage of a folding carrier is that since there are more hinges and connection…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Do Reese Ball Mounts Fit in Curt Hitches

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching