Availability of 2,200 Pound Axle with 93 Inch Hub Face Length
Question:
i was wondering if u have an axle 2200lb 93 inch hubface 5 bolt straight axle shaft available ? thank u
asked by: Thomas
Expert Reply:
I may have an option for you, however we do not currently have a standard 2,200 pound axle available that features a 93 inch hub-face-to-hub-face length.
I recommend taking a look at a Timbren Axle-Less Suspension System, such as the 2,200 Pound # ASR1THDS03. This system will provide a smooth, quiet, safe ride and can eliminate the need for a thru axle. They will fit any frame width and this particular kit features a 4 inch lift to provide greater ground clearance on your trailer.
I have attached a short video demonstration on this system so you can see exactly how they install and operate.
If you have a 5 on 4-1/2 inch bolt pattern on your wheels, you can use etrailer.com Idler Hub # AKIHUB-545-35-K or the Hub and Drum Assembly # AKHD-545-35-EZ-K if you have brakes on your trailer.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Q&A: Is There Trailer Axle Over Under Kit that Could Fit 5x8 Utility Trailer
- Article: Trailer Tire Sizing
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Q&A: Deflection of Timbren Axle-Less Trailer Suspension for Off-Road Tires ASR1THDS03
- Article: Trailer Lighting Requirements
- Q&A: Mounting Plate Dimensions for Ark XO Drop Down Corner RV Stabilizer Jacks
- Q&A: Hub/Drums for Timbren Axle Less Kit ASR35HDS02 to Add 6 on 5-1/2 inch Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: How to Carry Bikes While Towing a Travel Trailer