Replacement Crossbar Quick Disonnect for Roadmaster Falcon Tow Bar

Question

Question:

I have a RM Falcon 5250 tow bar. The base plate is installed on my 2009 Honda Ridgeline. I am missing the parts to connect the tow bar to the base plate. Any ideas?

asked by: Stephen T

0

Expert Reply:

Sounds like you are looking for the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. This comes with a new crossbar and all the hardware and connections to attach to a Roadmaster base plate kit.

expert reply by: Jameson C

0

Answer 1

My guess is that your Falcon 5250 tow bar is missing the quick disconnect crossbar assembly, #910021-00. This comes up frequently. This assembly has plates that bolt to the draw bar arms on the base plates. The crossbar pins to these brackets and the…

view full answer...

Answer 2

The Roadmaster Falcon 2 Tow Bar part #RM-520 comes with the crossbar which is required when used with the Roadmaster Crossbar-Style Base Plate Kit. If you have the Roadmaster Direct-Connect Base Plate Kit then you would just simply not use the…

view full answer...

Answer 3

Roadmaster part #910021-00 is the Quick Disconnect Tow Bar Base Assembly for all Roadmaster tow bars (except the Tracker #RM-020). This part includes the support bar, quick disconnects (both motor home and car sides) and the pins to attach the tow…

view full answer...

Answer 4

Hi Garry; we have exactly what you are looking for regarding wiring for your 2015 Kia Soul for flat towing: - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 - Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25

view full answer...

Answer 5

Since the owners manual of your 2003 Toyota MR2 Spyder with SMT transmission says it can be flat towed and to treat it like a manual transmission it can be towed using the Roadmaster base plate kit part #1169-1 that you referenced. In addition to the…

view full answer...

Answer 6

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 7

No, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200 is sending power to the lights and not pulling power from them to send out to the 4-pole connector. There are plug-in style trailer wire harnesses available though that I can…

view full answer...

Answer 8

The Roadmaster Battery Charge Line Kit part #RM-156-25 would be the kit you would need to charge the battery of your 2015 Nissan Xterra when it is being flat towed. This type of charge setup does not require a diode nor does it have potential to…

view full answer...

Answer 9

I hate to be the bearer of bad news, but there isn't any adapters that'll allow your Roadmaster StowMaster Tow Bar #RM-501 to be used with your Blue Ox base plates. Since you already have a base plate kit installed, I'd recommend just…

view full answer...

Answer 10

I will be happy to recommend the parts you will need to flat tow your 2016 Ford Fiesta behind your RV. The first item needed will be base plates. The base plates are what will mount to the Fiesta. They provide a safe attachment point for the tow bar.…

view full answer...

Answer 11

There are 5 basic components required to flat tow a vehicle with an RV or other vehicle. •Tow bar •Base plate kit •Safety cable set •Tow bar wiring •Supplemental braking system I have included a few articles for you that are loaded with information…

view full answer...

Replacement Crossbar Quick Disonnect for Roadmaster Falcon Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching