Kuat Bike Rack Recommendation that Has Bike Repair Stand

Question

Question:

It looks like there are two accessory hitch mounted repair stands that will work with TS02G. I cant find any videos or photos that have the stands mounted on the TS02G ... preferably with a bike being repaired. Thanks!

asked by: Joseph A

0

Expert Reply:

There is a Kuat bike rack that has a repair stand that comes with it but it's not the Transfer. It's actually the NV 2.0 part # NV22G. I attached the best picture of how it's used that we offer but we don't have one yet with a bike installed in it.

expert reply by: Jameson C

0

click to enlarge

Answer 1

You can have your bikes loaded up and still tilt the Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches #BA12B. I couldn't find where it said in the specs it could not be in the tilted position so I checked with Kuat and as you can see…

view full answer...

Answer 2

50". I checked with Kuat and the NV 2.0 Base Bike Rack for 4 Bikes item #BA22B-BA02B works with bikes having up to a 50" wheelbase.

view full answer...

Answer 3

I recommend the Kuat NV 2.0 Bike Rack for 2 Bikes #NV22G for your mountain bike with a 47.5" wheelbase. While the Kuat Sherpa #SH22G will only allow for a wheelbase up to 47" , the NV 2.0 allows a wheelbase up to 50". Another great…

view full answer...

Answer 4

After installing the Curt Trailer Hitch Receiver #C98DR onto your 2023 Hyundai Ioniq 5 you will have to trim the panel to be able to reattach it to your car. You will not have to modify the bumper. During the installation process the underbody…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Kuat Bike Rack Recommendation that Has Bike Repair Stand

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching