Recommendation for 2017 Heartland Torque Toy Hauler to Reduce Jarring and Chucking
Question:
I have a 2017 Torque toy hauler. When towing, as we drive over dips in the road, the 5th wheel nearly pulls the rear wheels of the truck off the ground. I noticed the trailer only has leaf springs, which may be the cause. How can we minimize this movement?
asked by: Kerry A
Expert Reply:
For your 2017 Heartland Torque Toy Hauler 5th wheel, I recommend the Lippert Components Bolt-On Shock Mount Kit w/Heavy Duty Oil Shocks - Fits 3" Axle Tube # LC281281 or the # LC281255 if you have the smaller 2-3/8 inch diameter axles.
These shock absorbers will help each axle they are mounted on to have less bounce and a more controlled movement.
The other options for less jarring and chucking is to use a cushioned pin box. The pin box number should be printed on your trailer's pin box on a sticker. It appears that it is a 1621 or 2621HD, and if so I recommend the 5th Airborne # RP78FR. This reduces longitudinal shock (chucking) by nearly 60 percent and decreases vertical shock by 44% which is what is making the rear wheels of your truck feel like they are being pulled up.
Products Referenced in This Question
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 2-3/8 Inch
- Single Axle
- Lippert
more information >
Reese 5th Airborne Premium Fifth Wheel Air Ride Coupler - 20,000-lb Capacity
- Fifth Wheel King Pin
- Upgraded Pin Box
- Absorbs Road Shock and Reduces Chucking
- 20000 lbs GTW
- Fixed Turret
- Fabex 600
- Lippert 1621
- Lippert 1621HD
- Lippert 0719
- Lippert Rhino
- Reese
more information >
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Q&A: Replacement Equalizer, Shackles and Shock Kit For a 2022 Nash 23D Travel Trailer
- Q&A: SumoSpring For A 2022 Grand Design 22RBE With Dual 3.5K Overslung Axles
- Q&A: Can Trailers Have Shock Absorbers Installed
- Q&A: Which MORryde X Factor Braces Do I Need for a Tandem Axle Trailer w/ CRE3000 Equalizers?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Shock for Dexter Axle 052-003-00
- Q&A: How to Measure to Determine Fit of Lippert Bolt-On Shock Kit LC281281
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings