Recommended Trailer Hitch Receiver for 2015 BMW X5 M Sport
Question:
Hello, I have a 2015 BMW x5 M Sport, and my trailer is 3500lbs 450lb tongue weight and has a 2” receiver, I’m wondering what type of hitch you recommend is? I’ve read in some places that you have cut the bumper fascia for this type of bmw, but obviously I would prefer to not do that. Also, should I get a weight distribution hitch? Thank you!
asked by: Rosemary N
Expert Reply:
For your 2015 BMW X5 M Sport model, I recommend the Curt Class III Round Tube Receiver Hitch # 13077. This will require fascia trimming but will also allow you to get the maximum towing and tongue weight capacity out of your vehicle as the hitch is rated at 6000 lbs towing and 600 lb tongue weight. This is the only confirmed fit we have for your M model vehicle.
A weight distribution hitch will help with the overall ride of the trailer and will help mitigate sway. I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET. This system is rated for 200 to 600 lbs total tongue weight which includes the loaded trailer tongue weight and any weight behind the rear axle of your BMW. This will be a great system for your application. It comes with a hitch ball, but you will need to use a thin-walled socket like # ALL643216 to install it.
I also recommend the Tekonsha wiring kit # 119250KIT for your vehicle side trailer wiring. This kit will give you a reliable wiring that draws power from your vehicle battery to protect the electronics in your vehicle. I've attached a video of this install to assist.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Add Tension to Solera Slide-Topper
- Q&A: Proper Solera Slide Topper Tension Adjustment
- Q&A: Is It Possible To Replace Fabric On Slide Out Awning?
- Q&A: Do I Need To Have A 3-Wire to 2-Wire Converter To Flat Tow a 2022 Ford F-150?
- Q&A: Correct Flat Tow Wiring Harness Didoes for 2022 Ford F-150
- Q&A: Solution for Needing Stoplight Circuit on Difficult to Find Vehicle
- Q&A: Tow Bar Wiring For A 2021 Ford F-150 With Incandescent & LED Taillights
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Must Have RV Accessories that Will Make or Break Your Trip
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class