Will RoadActive Suspension Raise the Height of a 2000 Ford F-250

Question

Question:

I have a 2000, f250 with the stock 4/1 leaf pack, that is rated for 3,000 lbs. Will the RAS3611-HD kit raise my rear end any? If so, what would the height difference be, between the two settings on the heavy duty kit?

asked by: Daniel

0

Expert Reply:

Installation of the RoadActive Suspension system # RAS3611-HD will not increase the unloaded ride height of your 2000 Ford F-250. When loaded if the truck were to normally squat the RAS will prevent that from happening.

expert reply by: Michael H

0

Answer 1

The answer to your question will depend on how you use your truck. Vehicle-based systems like the RoadActive Suspension system or air bags will work just fine with a weight distribution system, but they work best to suspend weight being hauled in the…

view full answer...

Answer 2

Yes, the correct RoadActive Suspension Heavy Duty kit for your 2001 Ford F-350 Super Duty is part #RAS3611-HD, which fits single and dual rear wheel models regardless of cab size. Just note that if your truck has factory overload springs (located…

view full answer...

Answer 3

The RoadActive Suspension Kit #RAS3611-Y is a confirmed fit for your 2013 Ford F-150 Crew Cab 4x4. To properly tension your spring, the black disc (2 mm thick) and the white disc (1 mm thick) are used for a gauge between the spring coils. The white…

view full answer...

Answer 4

We do have RV door trim available from Lippert with the White #LC326191 or Black #LC326192. This 76 inch long trim is designed specifically for use with the LCI Radius Screen Door, which it sounds like you may have. The overall height of the trim is…

view full answer...

Answer 5

The best suspension enhancement for your 2006 Ford F-350 for both support, ride quality, and stability is the RAS part #RAS3611-HD. With most kits you end up having to sacrifice ride quality to get the support and stability but with the RAS systems…

view full answer...

Answer 6

The RoadActive Suspension Kit #RAS3611-HD referenced in your question is confirmed to fit your 2009 Ford F-250, as long as it does not have the factory top overload springs. This heavy-duty kit will do a much better job of supporting the truck's…

view full answer...

Answer 7

The pinion angle would slightly change if you installed a RoadActive Suspension kit part #RAS3611-HD and you were using enough suspension support to change the ride height but it would not be enough of a change to require to change anything. You…

view full answer...

Answer 8

With you slide in truck camper causing the passenger side of your 2022 Ford F-350 Dually 2WD to sag more than the drivers side, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88391 are going to be the best option for you. The air bag…

view full answer...

Answer 9

SumoSprings recommends 1/2" to 1" of space once installed on your 2019 Ford F-250. This varies between vehicles so since you want the quickest engagement I would aim for the 1/2" space. You will have to use one of the 1/2" spacers…

view full answer...

Answer 10

The biggest difference between the TorkLift StableLoad Suspension, part #TLA7200 is the warranty. Torklift provides a lifetime warranty. The SuperSprings SuperSway-Stop option you mentioned has been discontinued for your vehicle so obviously people…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will RoadActive Suspension Raise the Height of a 2000 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching