Bolt On Hitch and 1 1/4 to 2 Inch Adapter For 2016 Infiniti QX50 AWD HOLD
Question:
I have a 2016 Infinity QX50 all wheel drive. Do you have a bolt on trailer hitch. I would prefer a 2inch as I want to use it for my 2-bike carrier
asked by: Robert
Expert Reply:
The only hitch we have available to fit your 2016 Infiniti QX50 AWD is the Curt Trailer Hitch Receiver # C11510. This hitch has a 1-1/4" receiver. it is a bolt-on installation with no welding required. The complete hardware kit and installation instructions included. If you want to carry your 2" bike carrier, I recommend # HTAD.
Please note: The tongue weight capacity of hitch will be reduced by 50% with use of adapter. Please confirm vehicle towing capacity with your owners manual. The Hitch accessory (bike rack, etc.) cannot be more than 3-3/8" long from the center of the hitch pin hole to the end of the shank (part that slides into the hitch). This product requires 5/8" pin for 2" receiver # PC3 and Requires 1/2" pin for 1-1/4" receiver # PC2.
I recommend the Thule Doubletrack Pro XT Bike Rack # TH92BJ. It has a doubletrack accommodates bikes of almost any size and length with reinforced, sliding wheel trays. These pivoting trays feature ratcheting straps and move along the platform to adjust to your specific bikes. The wheel straps also ratchet to stabilize your bikes for transport and eliminate bike-to-bike contact. The weight capacity is 70 lbs total / 35 lbs per bike and the carrier weight is 35 lbs.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 150 lbs TW
- 1500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Thule DoubleTrack Pro XT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Tilt-Away Rack
- Frame Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Thule
more information >
Product Page this Question was Asked From
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: E-Bike Rack Recommendation for Travel Trailer to Carry Aventon 500 and Carbon Frame Bike
- Article: Trailer Hitch Receiver Sizes
- Q&A: How to Use Thule T2 Pro XTR for 1-1/4 inch Hitch in 2 inch Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Does 2" Adapter on Thule EasyFold XT Bike Rack Reduce the Durability and Lifespan
- Q&A: Recommended Single Bike Rack for a Tern HSD P9 Bike With Fenders
- Q&A: Will 2015 Mini Cooper Center Exhaust Damage Trailer While Towing
- Q&A: Is There a Trailer Hitch & Wiring For 2024 Chevy Trax
- Article: Best Bike Racks for Electric Bikes
- Article: Rooftop Cargo Carriers
- Article: Hitch Adapters and Extenders
- Article: Best Bike Racks for Fat Bikes